Deltec Cozmo Uživatelský manuál stáhnout pdf (Strana 29)

About the Pump

Self Tests

During the self tests, the pump’s internal computer

performs tests on all the major hardware, computer, and

electronic systems.

☞

Warning: If there are any system problems, the

pump will stop the tests and display an alarm

screen letting you know there is a problem. If this

happens, do not use the pump.

After installing a new battery, watch the pump’s display

and verify the following:

• The internal computer’s software version appears, as

well as the pump serial number (SN) and last error

code (if any).

• The entire display becomes a darker gray. Look for

any blank or incomplete areas, which indicates a

broken display. The display then briefly turns off.

• The pump’s internal computer tests the major hard-

ware, computer and electronic systems. If there is a

problem with any system, an alarm occurs and you

will not be able to start insulin delivery.

When the self tests are complete, power up ends and

the pump beeps 6 times and stops at the home screen.

The first time you insert a battery and your new pump

performs the self tests, you will see the following alert

screens:

• a screen will appear that reads “Program Defaulted Set

time and date”. Program the current time and date by

pressing

and

to set the highlighted value, then press-

ing Next to move through the sequence. When the time

and date are correct, press Done.

• Next you will see a screen that reads “Program Defaulted

You must program the pump”. Press OK.

• After the pump beeps 6 times, a screen that reads “Car-

tridge removed Insert filled cartridge to continue deliv-

ery” is displayed. Press OK; the pump goes to the Load

menu. If you are ready to load a cartridge, follow the steps

indicated starting on page 35. If you aren’t ready to load a

cartridge yet, press Done.

NOTE: The pump has a built-in internal battery that pow-

ers the clock and allows the pump to store the programs

and history (see page 107) which is charged by the AAA

alkaline battery. If your pump has not been charged for

awhile, you may see a screen that reads “Program De-

faulted Setup of cartridge volume required, with no car-

tridge present, press Next”. Make sure no cartridge is

loaded into the pump and press Next.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 136 137

Komentáře k této Příručce

Žádné komentáře

Deltec Cozmo Uživatelský manuál Strana 29

Komentáře k této Příručce